| Exploration & Production Geology http://www.epgeology.com/ |
|
| Joint elastic‐electrical effective medium models of... http://www.epgeology.com/geophysical-prospecting-f45/joint-elastic-electrical-effective-medium-models-t528.html |
Page 1 of 1 |
| Author: | ArticlePoster [ Tue Apr 05, 2011 1:53 am ] |
| Post subject: | Joint elastic‐electrical effective medium models of... |
Geophysical Prospecting: Joint elastic‐electrical effective medium models of reservoir sandstones Improvements in the joint inversion of seismic and marine controlled source electromagnetic data sets will require better constrained models of the joint elastic‐electrical properties of reservoir rocks. Various effective medium models were compared to a novel laboratory data set of elastic velocity and electrical resistivity (obtained on 67 reservoir sandstone samples saturated with 35 g/l brine at a differential pressure of 8 MPa) with mixed results. Hence, we developed a new three‐phase effective medium model for sandstones with pore‐filling clay minerals based on the combined self‐consistent approximation and differential effective medium model. We found that using a critical porosity of 0.5 and an aspect ratio of 1 for all three components, the proposed model gave accurate model predictions of the observed magnitudes of P‐wave velocity and electrical resistivity and of the divergent trends of clean and clay‐rich sandstones at higher porosities. Using only a few well‐constrained input parameters, the new model offers a practical way to predict in situ porosity and clay content in brine saturated sandstones from co‐located P‐wave velocity and electrical resistivity data sets. Go to Article |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|