Exploration & Production Geology
http://www.epgeology.com/

Estimation and application of near‐surface full...
http://www.epgeology.com/geophysical-prospecting-f45/estimation-and-application-near-surface-full-t1019.html
Page 1 of 1

Author:  ArticlePoster [ Mon Jul 04, 2011 1:03 pm ]
Post subject:  Estimation and application of near‐surface full...

Geophysical Prospecting: Estimation and application of near‐surface full waveform redatuming operators

Land seismic data quality can be severely affected by near‐surface anomalies. The imprint of a complex near‐surface can be removed by redatuming the data to a level below the surface, from where the subsurface structures are assumed to be relatively smooth. However, to derive a velocity‐depth model that explains the propagation effects of the near‐surface is a non‐trivial task. Therefore, an alternative approach has been proposed, where the redatuming operators are obtained in a data‐driven manner from the reflection event related to the datum. In the current implementation, the estimation of these redatuming operators is done in terms of traveltimes only, based on a high‐frequency approximation. The accompanying amplitudes are usually derived from a local homogeneous medium, which is obviously a simplification of reality. Such parametrization has produced encouraging results in the past but cannot completely remove the near‐surface complexities, leaving artefacts in the redatumed results. In this paper we propose a method that estimates the redatuming operators directly from the data, i.e., without using a velocity model, in a full waveform manner, such that detailed amplitude and phase variations are included. The method directly outputs the inverse propagation operators that are needed for true‐amplitude redatuming. Based on 2D synthetic data it is demonstrated that the resulting redatuming quality is improved and artefacts are reduced.

Go to Article

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/