Exploration & Production Geology http://www.epgeology.com/ |
|
How to apply depth shift on check-shot data http://www.epgeology.com/geophysics-seismics-f22/how-apply-depth-shift-check-shot-data-t4805.html |
Page 1 of 1 |
Author: | aras1227 [ Fri Jun 06, 2014 7:12 am ] |
Post subject: | How to apply depth shift on check-shot data |
hi All, I am wondering if it is possible to change depth of recorded check-shot data (each stack or shot) after recording finished? I heard it is possible to change it while processing. I would appreciate if someone could help me. Many Thanks, Regards -mehmet |
Author: | GuyM [ Sun Jun 08, 2014 4:11 am ] |
Post subject: | Re: How to apply depth shift on check-shot data |
Author: | aras1227 [ Sun Jun 08, 2014 1:38 pm ] |
Post subject: | Re: How to apply depth shift on check-shot data |
Our transit times are OK. Only depth corresponding each shot needs to be shifted -15 m for each single-shot. I am corious if we can ONLY shift depth and keep transit time? |
Author: | GuyM [ Sun Jun 08, 2014 5:17 pm ] |
Post subject: | Re: How to apply depth shift on check-shot data |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |