Exploration & Production Geology http://www.epgeology.com/ |
|
Convert Darcy Flow factor? http://www.epgeology.com/reservoir-engineering-f10/convert-darcy-flow-factor-t436.html |
Page 1 of 1 |
Author: | tomholden [ Mon Mar 21, 2011 3:34 pm ] |
Post subject: | Convert Darcy Flow factor? |
Can anybody tell me how to convert the non Darcy flow factor, Beta, with units of atmĀ·s2/g to units of /ft ? It's not obvious how you would do this, and an internet search proved insuccesful thanks |
Author: | PetroBoss [ Tue Mar 22, 2011 9:35 am ] |
Post subject: | Re: Convert Darcy Flow factor? |
Tom, You can convert using these formulas: 1 atm =14.7 psi*(32ft/s2) = 14.7*144 Lb/ft2 *32 ft/s2 Then replace 1gm =1000/2.2 lbs Now you have your conversion factor to convert atm.s2/g to 1/ft. Hope this helped! |
Author: | tomholden [ Tue Mar 22, 2011 10:21 am ] |
Post subject: | Re: Convert Darcy Flow factor? |
thanks! this seems to work! |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |